Canon TS3522 Setup

The Canon TS3522 setup is a low-cost all-in-one inkjet printer designed for home usage that can print, scan, and copy. It has wireless connection and allows printing from smartphones, tablets, and PCs using the Canon PRINT app, AirPrint, and Mopria. The canon ts3522 wireless setup is simple: unpacking, installing ink cartridges, loading paper, and connecting to Wifi. Its small form saves room, and the user-friendly controls and intuitive border make it simple to operate. The TS3522 is perfect for printing papers, photographs, and creative projects, making it a dependable option for daily activities. To ensure a smooth installation, follow the on-screen directions.

Canon TS3522 Setup Features

Wireless connectivity: Use Wifi to seamlessly print from cellphones, tablets, or PCs.

Mobile Printing Support: Compatible with the Canon PRINT app, AirPrint (iOS), and Mopria (Android) for easy printing.

All-in-One Capability: Print, scan, and copy with a single compact device.
Simple cartridge installation with a hybrid ink system result in crisp papers and bright photographs.
Paper Support: Supports a variation of paper sizes and kinds, allowing for diverse printing.

User-Friendly Interface: Includes an instinctive control panel for simple navigation.
Compact Design: Space-saving construction ideal for home or small office use.
Energy Efficient: Designed with energy-saving modes to diminish power usage.
Simple Setup: Trail the instructions for a hassle-free installation.

Canon TS3522 Setup Manual Setup

Remove the printer from its container, including any protective coverings.
Open the front cover, insert the specified ink cartridges, and seal it firmly.
Correct the paper directors in the rear tray, then load paper and check the settings.
Link the printer to a power stock and activate the power knob.
The printer driver may be obtained from the Canon website or installed using the supplied CD.
If you are not using wifi, connect the printer to your computer using a USB cord.
To check that the setup works properly, run a test print.

Canon PIXMA TS3522 Wireless Setup

For canon ts3522 wireless setup follow these steps:

Confirm that printer is on and the Wifi bulb is flashing.
Fix Canon PRINT Inkjet/SELPHY app.
Trail the app’s commands to link the printer to your Wifi network using the Wireless Connect option.
Press and hold the canon pixma ts3522 wireless setup knob until the Wifi lamp flashes.
The app will allow you to select your Wifi network and input the keyword.
The app will detect and link to your printer.
Print a sample document or photo to confirm a canon wireless printer setup.

Canon Printer TS3522 Setup With App

Obtain the Canon PRINT Inkjet/SELPHY app from either the App Store or Google Play.
Check that the printer is turned on with a flashing Wifi light.
Open the app, tap “Set Up” or “Add Printer,” and then follow the on-screen instructions.
Press and hold the Wireless knob until the Wifi lamp flashes, then release.

First-rate your network and input your canon ts3522 wireless setup password.
Confirm the connection and test print with the app.
Use the app to scan documents, check ink levels, and manage print jobs.

Canon TS3522 Setup Issues And Their Solutions

Here are some typical issues, causes and solutions that one can face while executing canon ts3522 setup

Wifi Connection Failure:

Cause: Incorrect network information or a low signal.

Solution: Validate that the right Wifi password is typed. Position the printer closer to the router. Restart the router and printer, then connect again with the Canon PRINT app.

Printer Not Recognized:

Cause: incomplete driver installation or a defective USB connection.

Solution: Reinstall the Canon TS3522 driver from the Canon website. For wired configurations, validate that the USB cable is connected properly. For wireless, ensure that the printer is associated to the equivalent network as the device.

Ink Cartridge Not Detected:

Cause: Incorrect installation or insufficient ink levels.

Solution: Remove and replace the ink cartridges, validating that they click in place. Replace empty cartridges and clean the cartridge connections as needed.

Paper Jam Error:

Cause: A misaligned or overloaded paper tray.

Solution: Turn off printer, sensibly eradicate the stuck paper, and examine for ripped bits. Reload paper accurately without exceeding the tray capacity.

Print Quality Issues:

Cause: A dirty print head or poor quality paper.

Solution: Clean the print heads using the Canon PRINT app or the printer’s maintenance settings. Use high quality paper and original Canon ink containers.

Firmware Update Failure:

Cause: Network instability or an interrupted update.

Solution: Restart the printer and maintain a steady internet connection. Restart the firmware update via the Canon website or the printer’s control panel.

What Is The Canon TS3522 Reset Process

Soft Reset:

Switch off the printer, unhook the power cable, and wait a few minutes. Plug it back in and power it on.

Network reset:

To reset the network, press and hold both the Wireless and Power knobs for roughly 10 seconds until the Wifi light flashes. This resets the network settings.

Factory Reset:

Press and hold the Stop knob until the alarm bulb blinks 21 times.
Release knob to return printer to its factory default settings.

Reconfigure:

After the reset, reconnect the printer to Wifi via the Canon PRINT app or manual configuration.

Confirm Reset:

Print a network configuration page to confirm the successful reset.

How To Update Firmware On Canon TS3522

Ensure Connection: Check that the printer is connected to Wifi.
To enter Maintenance Mode, press the Setup knob (wrench icon) until the number “4” is shown.
Select Firmware Update. To initiate the update, press the Color knob.
Online Update: The printer will automatically obtain and install the fresh firmware version.
Monitor Progress: The Power and Wifi LEDs will flicker during the updating process.
Restart Printer: Once completed, the printer may automatically restart.
Check the version: Print a configuration page to confirm that the firmware is up to current.
Manual Update Option: Firmware may also be updated using the Canon PRINT app or https //ij.start.canon.

FAQs

Q.1:- How can I link my Canon TS3522 to Wifi?

Press and hold the Wireless knob until the Wifi indicator flashes. To discover your printer, open the Canon PRINT app, pick your Wifi network, and input your password. To finalize the connection, simply trail the guidelines.

Q.2:- What should I do if my Canon TS3522 does not print?

Confirm that the printer is turned on and linked to Wifi. Check for paper jams, empty ink cartridges, and pending print jobs. Restart your printer and device. If you’re using a PC, reinstall the driver and attempt printing again.

Q.3:- How can I get drivers for the Canon TS3522?

Visit the Canon website, then go to the Support area and search for “Canon TS3522.” Obtain the most recent drivers and software for your operating system. To set up your printer, simply follow the installation instructions.

Q.4:- How do I scan using the Canon TS3522?

Place the document on the scanning bed. Launch the Canon IJ Scan Utility on your PC. Choose the scan type (document, picture). Make any necessary changes to the parameters before clicking “Scan.” The scanned file is automatically saved to your specified place. Before you start scanning, make sure the printer is connected.

Q.5:- How do I set my Canon TS3522 as the default printer on Windows 10?

Go to Settings > Devices > Printers and Scanners. Find “Canon TS3522” in the list, click it, and then choose Manage > Set as default. If Windows manages your default printer, turn off “Let Windows manage my default printer” in Settings before manually setting it as default.

Q.6:- What is the setup button on the Canon TS3522?

The setup button, which is commonly denoted with a gear symbol, provides access to network settings, maintenance, and printer configuration choices. Use it to start Wi-Fi setup, reset settings, or troubleshoot problems. Refer to the printer’s manual for particular functionality associated with various setup button activities.

Q.7:- Why is my Canon TS3522 not connecting to my computer?

Ensure that the printer is turned on and connected via Wi-Fi or USB. Restart both the printer and PC. Check Device Manager for outdated drivers or reinstall the Canon program. If you’re using Wi-Fi, check your network connection. Reset the printer’s network settings, then reconnect if necessary.