Canon TR4720 Setup

The Canon TR4720 setup is a multipurpose inkjet printer that can be used for printing, scanning, copying, and faxing. It is envisioned for usage in homes and small offices. Unpack the printer, plug it in, and trail the directions to begin the Canon TR4720 setup process. Load paper into the back tray and insert the ink cartridges. Connect via USB, Wi-Fi, or mobile printing using Mopria, AirPrint, or the Canon PRINT app. Drivers for Mac and PC compatibility may be downloaded from Canon’s website. To make sure the configuration is correct, do a test print. For economical operation, the TR4720 has a 30-sheet ADF, auto duplex printing, and economical ink consumption.

Canon TR4720 Setup Manual

After removing the packing, switch on the printer and plug in the power cable.
Insert the black PG-275 and color CL-276 ink holders subsequently opening front cover and shutting it.
Insert plain or photo paper, arrange them correctly, and adjust the guides in the back paper tray.
To configure the language, region, and date/time, observe the guidelines.

For device connection, pick from USB, Wi-Fi, or mobile printing.
Download the printer software for Windows and macOS by going to https //ij.start.cannon.
Run a print test and sign up for Mopria, AirPrint, or the Canon PRINT App for mobile access.
For high-quality printing, clean the printhead on a regular basis and check the alignment.

Canon TR4720 WiFi Setup

For canon TR4720 wifi setup go through these steps:

Make sure the printer is ready and switched on.
On the printer, press Canon TR4720 wifi setup knob (gear icon).
Choose wifi setup using the arrow keys, then click OK.
Choose Manual Connection or Easy Wireless Connect.
Simply press and hold the wireless knob until the Wi-Fi bulb flashes to establish a wireless connection.
To connect, adhere to the instructions on the Canon PRINT app or computer canon printer wifi setup tool.
To connect manually, pick your network from list and input keyword.
When Wi-Fi is established, a success message is shown.
Install the Canon software on your Mac or PC after downloading it.
To validate that everything is set up suitably, send a print job from your device.
Restart the router and printer if problems occur, then follow the same procedures.

Canon PIXMA TR4720 Setup With App

To comprehend Canon PIXMA TR4720 setup with app stick to these points:

The Canon PRINT Inkjet/SELPHY app should be fitted.
Make sure it is prepared and switched on.
If you haven’t already, proceed with the Wi-Fi setup procedure.
On your tablet or smartphone, launch the app.
Select “Register Printer” after tapping “Add Printer.”
On the identical WiFi network, app will look for printers that are accessible.
From the devices that have been identified, tap on Canon TR4720.
To comprehend registration, observe to the commands.
Send a print job or scan a document using the app.
Turn on document scanning, cloud printing, and ink status tracking.

Canon TR4720 Scanner Setup

You can easily execute canon tr4720 scanner setup if you will follow these instructions:

Make sure the Canon TR4720 is connected properly and prepared before turning on the printer.
Install Scanner Drivers: Visit Canon’s official website to get the most recent version of the Canon scanning software.
To load a document, open the lid of the scanner and lay the paper on the glass, face down.

Choose Scan Mode:

To scan, use the Canon PRINT app or the printer control panel.
Use the Canon IJ Scan Utility on your Mac or PC.
Launch the IJ Scan Utility application.
Choose between the Photo Scan and Document Scan modes.
Modify the resolution and file format.

Regarding Mobile Scanning:

Launch the Canon PRINT application.
To modify scan parameters, tap Scan.
To begin scanning, click Scan on the app or printer. Your chosen device displays the scanned document.
Conserve the scan. Select whether to save as a PNG, JPEG, or PDF.
Edit or Share: To improve or send the scanned file, use the editing features in the app or program.

Troubleshooting: If the scan doesn’t work, make sure the program is installed correctly and the USB/Wi-Fi connection is steady.

Canon TR4720 Setup Issues And Solutions

Here are some Canon TR4720 setup issues and their solutions:

The printer is not turning on

Problem: After connecting in, printer does not turn on.

Solution: Verify that the power cable is plugged into the socket and the printer correctly. Take a look at another outlet.

Wi-Fi Connection Issue

Problem: The printer cannot establish a Wi-Fi connection.

solution: Restart the printer and router. Make sure the Wi-Fi password is typed correctly and use the Easy Wireless Connect option.

Problems with Driver Installation

Problem: The computer is unable to identify the printer.

Solution: Visit Canon website to get fresh drivers. For a wired connection, make sure the USB cable is plugged in correctly.

Unidentified Ink Cartridge

Problem: An ink cartridge problem message appears on the printer.

Solution: Take out and put the black PG-275 and color CL-276 cartridges back in. Make sure the protective tape is taken off.

Jams in paper

Problem: A jam causes the printer to halt.

Solution: Carefully remove any adhered paper by opening the back flap. Reload the paper in the correct alignment.

Problems with Print Quality

Problem: The prints are faded or fuzzy.

Solution: Use the printer’s settings to clean the printhead. Make use of superior paper.

The scanner is not functioning

Problem: The scanner is unresponsive.

Solution: Verify that scanning software is set up. Restart the printer and connect to the WiFi or USB again.

Failures with Mobile Printing

Problem: The Canon PRINT app is inept to recognize the printer.

Solutions: Reinstalling the software and validate that the mobile device is connected to the equivalent WiFi network are solutions.

Canon TR4720 Firmware Update

Select Device Settings > Firmware Version from the printer’s menu, then take note of the version.
Enter Canon TR4720 in the help area of the official Canon website.
Get the most recent Windows/macOS firmware update file.
Make sure the printer has a steady internet connection and is powered on (for Wi-Fi updates).
During the apprise, don’t shut off printer.
Open firmware update tool that you downloaded.
To move the update to the printer, observe to the on-screen directions.
To update the firmware, go to Canon TR4720 setup > Device Settings > Firmware Update.
Verify the update and watch for it to be finished.
To implement changes, restart the printer when the update is complete.
To make sure the upgrade was efficacious, check firmware version once another time.

Canon TR4720 Reset Process

(Basic Troubleshooting) Soft Reset

Press the Power knob and disconnect the printer to turn it off.
Give the printer five minutes to completely reset.
Restart it after plugging it back in to turn it on.

Resetting the network (Wi-Fi problems)

On the printer, press the Canon TR4720 wifi setup Knob (Gear Icon).
To browse, choose Device Settings and use the arrow keys.
Select Reset Network Settings under Reset Settings.
Verify Reset: This will remove all Wi-Fi settings.

Complete Factory Reset

Select Reset Settings under Canon TR4720 setup > Device Settings.
Choose “Reset All.” All printer settings will be deleted as a result.
Verify Reset: The printer will resume on its own.

After-Reset Configuration

If necessary, reinstall drivers, reconnect Wi-Fi, and adjust the Canon PRINT app.

FAQS:-

Q.1:- How do I connect my Canon TR4720 printer to my computer?

To connect your Canon TR4720 printer, install the Canon software, enable WiFi, and follow the on-screen instructions. Select your WiFi network and input the password using the printer’s control panel. Connect by USB cable for a wired configuration. Ensure that drivers are installed for appropriate operation.

Q.2:- How to enter numbers for WiFi password on Canon printer TR4720?

To input digits for the WiFi password, utilize the printer’s keypad. Press the corresponding key many times to cycle among letters and numbers. After entering the password, use the arrow keys to scroll and confirm by clicking “OK”.

Q.3:- Is Canon TR4720 compatible with Windows 11?

Yes, the Canon TR4720 works with Windows 11. Ensure that you download and install the most recent drivers from Canon’s official website. If problems develop, use Windows compatibility mode or upgrade the printer firmware. Wireless and USB connections work, but verify system requirements and software upgrades to guarantee smooth performance.

Q.4:- Why is my Canon PIXMA TR4720 not printing?

If your Canon PIXMA TR4720 isn’t printing, check the ink levels, paper jams, and connection condition. Restart both the printer and PC. Make sure you have the right printer chosen in the settings. Update or reinstall drivers as needed. Running the Windows troubleshooter or Canon’s printer diagnostic tool may also help address problems.