Canon PIXMA TS3320 Setup

The Canon PIXMA TS3320 setup is a wireless inkjet printer that may be used at home or in a small workplace. It is perfect for daily chores because it has a wide range of printing, scanning, and copying capabilities. Printing from computers, tablets, and smartphones is made possible via the printer’s Wifi connection. The Canon PRINT app makes it simple to set up the PIXMA TS3320, which can print fine text documents and borderless photos. For consumers looking for high-quality prints at a reasonable cost, it offers effective performance because to its small size and intuitive interface. A seamless experience is guaranteed by the easy and straightforward setup procedure.

Canon PIXMA TS3320 Setup Manual

Use these procedures to manually configure the Canon PIXMA TS3320:

The printer should be placed close to a power outlet.
To reach the ink cartridge region, open the printer’s front cover.
Make that the black and color ink cartridges click into place by inserting them into the appropriate slots.
Shut the front cover.
Extricate the paper tray from the printer’s rear.
Validate that the plain paper is properly positioned before loading it into the tray.
Adapt the paper guide to the paper’s dimensions.
Attach other end of power chain to power passage after plugging it into the printer’s back.

To stimulate the printer, press power knob.
You will be prompted by the printer to use the control panel to choose your language and location.
To confirm, pick your settings using the arrow keys and click “OK.”
Go to Wifi configuration option on printer interface.
Choose WPS or Standard Setup after selecting Wifi setup.
For canon pixma ts3320 wireless setup, choose “Connect” on the printer after pressing the WPS knob on your router.
Use the supplied CD, if it is available, or download the Canon PIXMA TS3320 drivers and software from the official Canon website.

Canon PIXMA TS3320 Wireless Setup

The canon pixma ts3320 wireless setup may be remotely configured by following these steps:

Press power knob to on printer after connecting it to a power basis.
Press and hold the Wifi knob on the printer control panel until the Wifi lamp flashes.
Use Standard Setup or WPS to connect to Wifi.
Select Wifi network and put the keyword for Typical Setup.
Install the required drivers on your PC by downloading them from Canon’s website.
For a wireless connection, adhere to the directions.

Canon PIXMA TS3320 Setup With App

Use Canon PRINT Inkjet/SELPHY app to configure Canon PIXMA TS3320 by ensuing the subsequent:

Get the app.
Confirm that the printer is turned on and prepared for use.
Choose your Canon PIXMA TS3320 printer from the list when the app opens. Enter your network password and track commands to link printer to Wifi network.
You can follow the app instructions to install the required drivers on your smartphone.
To validate that whole thing is operating appropriately, you may print straight from the app when setup is finished.

Canon PIXMA TS3320 Wifi Setup

Use these procedures to configure Wifi on the Canon PIXMA TS3320:

Confirm that printer is on and connected.
Press Wifi knob on control panel of the printer.
After selecting Wireless LAN configuration, click OK.
Choose between Standard Setup and WPS (Wifi Protected Setup).
For canon wireless printer setup, choose “Link” on the printer after pushing the WPS knob on router.
Select network from list and input Wifi keyword for Standard Setup.
The printer will provide a confirmation message when it has been connected.
To finish the setup, install the necessary drivers on your PC from http ij start canon website.

Canon PIXMA TS3320 Setup Issues And Troubleshooting

Here are some typical difficulties and troubleshooting techniques for Canon PIXMA TS3320 setup issues:

1. The Printer Will Not Turn On

Confirm the Power Source: Make that the power cord is firmly attached to a functional electrical outlet and the printer.
Try a Different Outlet: Try connecting the printer into a different outlet if it still won’t switch on.

2. Issues With Wifi Setup

Confirm the Correct Network: Confirm that you are choosing the appropriate Wifi network and that you are entering the proper password.
Wifi not connecting to the printer: Reconnect to the Wifi after resetting the printer’s network settings. Press the printer’s “Wireless” knob, then stick to instructions.
Problems with the router: Make that the printer is in array of Wifi network and that your router is operational.

3. Problems Installing Software Or Drivers

Install the printer driver again: Reinstall the printer driver after uninstalling it from the Canon website. Confirm that the version you download is compatible with your operating system.
Utilize the Canon Setup App or CD: Use the Canon PRINT Inkjet/SELPHY software or the Canon setup CD if you can’t install drivers by hand.

4. Not Feeding Or Paper Jam The paper

Look for any paper jams. Cautiously eradicate any trapped paper by opening paper tray and printer lid.
Paper Size and Type: Confirm that the printer’s settings correspond to the paper’s size and type and that the paper is loaded appropriately.

5. Blinking Lights Or Error Messages

Examine the ink cartridges: Validate that there is enough ink and that the ink cartridges are inserted correctly.
Reset the Printer: To get rid of any lingering error messages, do a hard reset.

6. Problems With Printing

Confirm Printer Queue: Confirm that your computer’s printer queue is free of any stalled print tasks.
Test Print: To determine whether the problem is with the printer or your connection, run a test print.
Levels of Ink: Confirm that the ink cartridges are neither dry or empty.

7. The Scanner Is Not Functioning

Confirm the connection: Confirm the stability of the Wifi or USB connection.
Reinstall Scanner Driver: Reinstall the scanning program if the scanner is not perceived.

Canon PIXMA TS3320 Firmware Update

Use these measures to apprise the firmware on Canon PIXMA TS3320 printer:

Get the printer ready by making sure it is turned on and linked to a reliable Wifi network.

Go to the settings or configuration menu on the control panel of printer.
Search for a “Software Update” or “Firmware Update” option.
The printer will ask you to transfer and install any available firmware updates. To start the procedure, confirm.
Do not switch off printer while apprise is taking place; it might take numerous minutes.
To validate that apprise was applied appropriately, printer will start over itself when it is finished.

Canon PIXMA TS3320 Reset

Use these actions to reset Canon PIXMA TS3320 printer:

To shut off printer, press power knob.
Unplug the printer’s power cord from the rear.
This guarantees that any remaining power is used up.
Press power knob to switch on printer after re-plugging the power cord.
If you wish to change the printer’s configuration:
Holding down “Stop/Reset” switch will cause alarm light to gaudy.
To finish the reset procedure, let go of the knob.
If necessary, re-configure your Wifi connection.

FAQS:-

Q.1:- Can I use the Canon PIXMA TS3320 with a mobile device?

Using the Canon PRINT app, the Canon PIXMA TS3320 is compatible with mobile devices. You may use your tablet or smartphone to wirelessly print and scan. Both iOS and Android smartphones may use it. Just download the app, establish a Wi-Fi connection to the printer, and begin printing. Mopria Print Service for Android and AirPrint for iOS are other choices.

Q.2:- How do I replace ink cartridges in Canon PIXMA TS3320?

Open the front cover and cartridge access door of the Canon PIXMA TS3320 in order to change the ink cartridges. Await the cartridge holder to come to a stop. Release the cartridge by pressing down on it, then take it out. Make sure the replacement cartridge snaps into position when you insert it. To position the cartridges, close the access door and adhere to the on-screen directions.

Q.3:- How do I install the Canon PIXMA TS3320 on Windows 10?

Download the driver from Canon’s official website to install the Canon PIXMA TS3320 on Windows 10. Launch the installation, follow the on-screen directions, and connect the printer to your computer via USB or Wi-Fi. To guarantee a successful printing and scanning setup, use the Canon PRINT app or Control Panel settings.

Q.4:- How do I set up the Canon PIXMA TS3320 with Mac?

Obtain the printer driver from Canon’s website to configure the Canon PIXMA TS3320 on a Mac. After installing the driver, add the printer to “System Preferences” under “Printers & Scanners.” You may also connect the printer via USB or Wi-Fi. After choosing the PIXMA TS3320 from the list, finish configuring it.