Canon Lide 120 Setup

The Canon LiDE 120 setup is a small, easy-to-use flatbed scanner that may be used at home or in the business. Depending on the model, you may either set up the scanner remotely or by connecting it to your computer via USB. To make scanning duties easier, Canon offers software like the IJ Scan Utility. The operating systems Windows and macOS are both compatible with the device. Drivers may be downloaded from Canon’s website, and the Canoscan Lide 120 setup process is simple. Once configured, users may take use of its high quality and effective scanning features to quickly scan documents, images, and more.

Canon LiDE 120 Manual Setup

Use these procedures to manually configure the Canon LiDE 120 scanner:

Remove any protective films from the scanner after unpacking it.
The scanner should be placed close to your PC on a level surface.
Validate that the USB cable that comes with the scanner is beavered into computer.
The Canon Lide 120 Scanner Driver Setup may be downloaded from Canon’s official website or inserted into the supplied CD.
Launch the installation and obey the prompts exhibited on screen.

Before installing the driver, validate that it is well-suited with version of operating system.
If you haven’t formerly, connect the scanner to your computer when the driver installation is finished.
Your computer should distinguish scanner on its own.
To test the scanner, launch a scanning program.
To validate that everything is operating as it should, place a document or image on the scanner bed and start the scan.
Restart your computer, reload the driver, or check the USB connection if the scanner is not standard.

Canoscan Lide 120 Setup WPS

Use these steps for Canon LiDE 120 Installation guide with WPS (Wi-Fi Protected Setup):

Validate that your router is prepared to connect to the scanner and supports WPS.
The router has to have WPS activated.
The Canon LiDE 120 scanner should be turned on.
Either press and hold the “Wi-Fi” knob or follow the manual’s directions for setting up the scanner’s Wi-Fi.
The WPS connection procedure will begin as outcome of this step.
Press WPS knob on router.
An automated wireless connection will be made between router and scanner.
Authenticate that linking has been efficaciously made by looking at scanner display.
Send a wireless document scan to your PC or mobile device to test the scanner.
Try resetting the Wi-Fi configuration on the router and scanner, then try again if the WPS connection doesn’t work.

Canon Lide 120 Scanner Driver Setup

Use these procedures to install the Canon LiDE 120 scanner driver:

Look for the LiDE 120 scanner model on the Canon support page.
For your operating system, choose the relevant driver.
Get the Canon Lide 120 setup driver canon printer file.
Double-clicking copied file will start installation progression.
To fix driver, obey commands. You might be asked to choose your installation choices and accept the agreements.
The scanner could request that you connect to your computer throughout the installation procedure.
If requested, restart your computer when the installation is complete.
Validate that USB is attached to scanner and your computer.
To test setup canon printer device, launch the scanning program after installation, such as Windows Fax and Scan or Canon IJ Scan Utility.
To validate that the driver has been installed correctly and the scanner is operating as intended, do a scan.
To guarantee optimum performance, often check Canon’s website for driver updates.

Canon Lide 120 Setup With App

Use these steps to configure the Canon LiDE 120 scanner with an app:

For desktop and mobile devices, Canon offers scanning applications such as Canon IJ Scan Utility.
Depending on your operating system, download the desktop program from Canon’s official website.
Get the Canon app.
After downloading the software to a desktop, launch the installation file and observe the Canon Lide 120 Setup guidelines.
Just install and use the app on your phone.
Validate that PC or mobile is linked to the Canon LiDE 120.

Canon Lide 120 Troubleshooting

To know about Canon Printer troubleshooting follow the points given here:

Scanner Not Activating:

Authenticate that USB is plugged into computer and scanner, and check power supply.
To rule out malfunctioning ports, try connecting the scanner to a different computer or USB port.

No Scanner Found:

Validate that you have installed the required drivers. To get the most recent operating system drivers, go to Canon’s official website.
Reconnect the scanner after restarting your computer.
Look for any scanner-related problem warnings in System Preferences (Mac) or Device Manager (Windows).

Problems with scanning:

Try restarting the scanner and modifying the scanning parameters (color mode, resolution) if the scans are deformed or blank.
The quality of the scan may be impacted by dust or smudges on the glass surface of the scanner.
Visit Canon support page to see if there are any firmware or software elevations obtainable.

Error Notifications:

When the problem code appears on the screen, trail commands. Reinstalling the program, restarting the computer, or disconnecting the scanner are common fixes.
Try using the scanner with a different program (e.g., Image Capture on Mac, Windows Fax and Scan).

Problems with USB cables:

Replace the USB cord if the scanner is still not working, as a broken cable may result in problems connecting.

Canon LiDE 120 Installation

Use these procedures to install the Canon LiDE 120 scanner:

Connect provided USB to scanner and USB port on PC after taking scanner out of box.
Visit Canon website to get most recent driver. Validate that operating system you choose is correct.
To install obligatory app, open transferred file and observe the guidelines.
Restart computer (if requested) when the installation is done.
To verify that the scanner is operating properly, run a test scan using the IJ Scan Utility.

Canon Lide 120 Reset

Use these trials to reset Canon LiDE 120 scanner:

If the scanner has a power switch, turn it off or detach it from computer.
Open the Canon IJ Scan Utility if you’re having trouble scanning. Click “Restore Defaults” or “Reset Settings” after selecting “Preferences” or “Settings” to restore the software’s settings.
To reset the hardware connection, disconnect the USB cord, wait 10–20 seconds, and then rejoin the scanner.
Reinstalling the drivers will reset the Canoscan Lide 120 setup and get rid of any possible errors if issues continue.
Make that the scanner is operating correctly by testing it after resetting.

FAQS

Q 1. How do I connect Canon Lide 120 scanner to Windows 10 or macOS?

Use USB to connect the scanner.
Get your OS’s drivers and software from Canon’s official website.
To finish canon lide 120 setup, install and adhere to the instructions.

Q 2. Is the Canon Lide 120 compatible with third-party scanning software?

Yes, VueScan and TWAIN-compatible apps are compatible with the Canon LiDE 120.

Q 3. Can I set up the Canon LiDE 120 without a CD?

Go to the Canon support website.
Download software and drivers.
Put them in by hand.

Q 4. How do I scan documents using Canon LiDE 120?

Launch the IJ Scan Utility from Canon.
Select either “Document” or “Photo.”
The paper should be placed on the scanner bed.
Press “Scan.”

Q 5. How do I update Canon LiDE 120 scanner drivers?

Visit Canon’s website to get the most recent drivers.
Remove any out-of-date drivers.
Restart your computer after installing the updated drivers.