Canon G6020 Setup: Step-By-Step Guide.

It shouldn’t be difficult to set up a new printer, particularly when using a powerful device like the Canon PIXMA G6020. This comprehensive tutorial covers everything you need, whether you’re unpacking your printer for the first time, connecting it to Wi-Fi, troubleshooting an offline Canon G6020 setup issue, or comparing the device to the Canon Setup.

Why is the Canon G6020 Setup Unique?

A MegaTank all-in-one printer, the Canon PIXMA G6020 is renowned for its remarkable color output, cheap cost per page, and high printing volume. It’s popular among home offices, small companies, students, and anybody who prints regularly because of its wireless connectivity and refillable ink bottles.

Let’s start with the installation requirements before delving into the detailed Canon G6020 setup.

How to Configure a Canon G6020 Setup: A Comprehensive Guide

Open the printer’s box

The contents of the package include:

The printer Canon Pixma G6020
Complete set of ink bottles (black, yellow, magenta, and cyan)
Print head
Power cord
Instructions for setup
The warranty card
Take off all package materials and protective blue tape.

Put the Print Head in Place

Raise the scanner’s top cover.
The print head compartment should be opened.
Unwrap the print heads carefully.
Place them in the corresponding (color-coded) slots.
Securely close the latch.

In order to prevent future problems like Canon G6020 color ink not functioning, this step is essential.

Fill the Tanks with Ink

Insert the matching ink bottle after opening the cover of each ink tank. When the tank is full, the bottle will robotically stop; no squeezing is required.

After every tank has been filled:

Shut the reservoir lids.
Hold the ink bottle tops firmly.
Let the printer start up.

Turn the printer on

Turn on the device, connect the power cord, and stick to the directions.

Three Ways to Set Up the Canon G6020 WiFi

One of this model’s greatest advantages is connectivity. Any of the following can be used to set up the Canon G6020 WiFi:

Method 1: Simple Wireless Connection (Suggested)

Holding down the Wireless knob will cause the Wi-Fi light to flash.
Pairing mode is activated by the printer.
Install the Canon PRINT Inkjet/SELPHY app on your computer or phone.
Choose “Add Printer.”
Enter your Wi-Fi password after selecting your network.
This is the most dependable and quick way to link the Canon G6020 printer to WiFi.

Method 2: Push Knob for WPS

Use this only if WPS is supported by your router.
Holding down the Wireless knob will cause the light to flash.
On your router, press the WPS knob.
Await the completion of the connection.

Method 3: Setting Up a Wireless LAN Manually

Utilize the LCD menu on the printer:

Navigate to Wireless LAN Setup under Setup.
Choose your wireless network.
Put your password in here.

Configuring the Canon G6020 for Windows

Go to https://ij.start.canon.
Get the software and drivers for the G6020.
Launch the installation tool.
Choose a LAN, USB, or wireless connection.
Stick to the setup instructions exhibited on the screen.

You could be having a Canon G6020 offline problem if the printer doesn’t show up; troubleshooting advice is provided later in this tutorial.

Canon G6020 setup on Mac Configuration

Canon G6020 setup on a Mac is easy:

Navigate to Printers & Scanners under System Settings.
To add a printer, click the + symbol.
Choose the Canon G6020 Series.
Install the complete Canon drivers from https//ij.start.canon or choose AirPrint.
Examine a printed page.

Validate that the printer is on the same Wi-Fi network and that the Canon G6020 wireless configuration is accurate if it doesn’t show up.

Connect the Canon G6020 to a Phone or Computer

Connect to the computer using Wi-Fi or USB:

For a reliable wired connection, use a USB cable.
or establish a wireless LAN connection using the Canon PRINT software.

Connect to an Android or iOS phone:

Get the Canon PRINT Inkjet/SELPHY app.
To pair the device, use Easy Wireless Connect.
Print straight from programs like Apple Photos or Google Docs.

How to Update the Firmware on a Canon G6020

Updates to the firmware correct bugs, enhance performance, and resolve problems like support codes or connection difficulties.

Steps for Canon G6020 firmware update:

Navigate to Canon G6020 setup→ Device Settings → Firmware Update from the printer menu.
Select “Install Update.”
Hold off until the installation is finished.
Avoid shutting off the printer while the apprise is running.

Canon G6020 Offline Troubleshooting Guide: How to Make It Right

Try this if your printer appears to be offline:

Verifying that the two devices are connected to the equivalent network
Restarting the PC, router, and printer
Using the Canon G6020 wifi setup to reconnect
Reinstalling the drivers
Turning off the VPN
Making sure the printer is configured as the default printer

Solutions for Canon G6020 Color Ink Not Working

If the colors don’t print:

Verify that there is ink in the ink tanks.
From the Maintenance menu, select Cleaning.
Do a thorough cleaning.
Verify the proper installation of print heads.
Update the firmware or drivers for the Canon G6020.
Use the Nozzle Check feature to look for clogged nozzles.

Factory Reset for the Canon G6020

Resets can occasionally resolve recurring problems like offline status or Wi-Fi failures.

Steps to reset:

Navigate to Device Settings under Setup.
Select Reset Settings.
Choose Reset All.

This restores the printer to its initial factory settings, necessitating a subsequent Canon G6020 wifi setup.

Canon G6020 Support Code 5200: Interpretation and Resolution

Typically, support code 5200 denotes:

Problems with the ink system
Print head overheating
Incorrect ink blend within the skull

Fix:

Turn off the printer for twenty minutes.
Verify the amount of ink.
Deep cleaning and run cleaning.
Return to the factory configuration.

The print head might need to be replaced if the problem persists.

Which Is Better, the Canon G6020 or the Canon G3270?

Print Volume: Canon G3270 setup is superior for light to medium usage, while G6020 is built for heavy-duty printing with larger page yields.
Print Speed: Compared to the G3270, the G6020 prints more quickly in both black and color.
Paper Capacity: G3270 employs a single 100-sheet rear tray, whereas G6020 has a 250-sheet front tray and a rear tray.
Connectivity: Wi-Fi, Ethernet, and USB are supported by the G6020; Wi-Fi and USB are supported by the G3270.

Display: The G3270 features a simpler, smaller display, whereas the G6020 has a 2-line LCD.
Cost: G3270 is more reasonably priced, which makes it perfect for everyday household use.

The best option is the G6020 for high output and productivity, and the G3270 for everyday printing that is affordable.

This tutorial provides everything you need for a seamless experience, whether you’re installing your printer via Canon printer wifi setup, finishing the Canon Pixma G6020 setup, resolving offline difficulties, or updating the Canon G6020 firmware.

FAQs:-

Q1: How to replace ink on Canon G6020?

For black ink (tank C), open the left cover; for color tanks, open the right cover. Pour the ink into the designated ink tank until it is full by opening the cap.

Q2: How do I perform a test print on Canon G6020?

Typically, you may initiate a test or nozzle-check page on the printer by holding down the “Stop” (or “Resume/Stop”) button for a few seconds.

Q3: Where can I download Canon G6020 drivers?

The G6020 drivers may be downloaded from Canon’s official website (Support → Drivers/Software → choose “PIXMA G6020”).

Q4: Why is my Canon G6020 not printing after setup?

Common issues include obsolete printer firmware, improperly installed drivers, unreliable Wi-Fi or USB connections, and full printer “maintenance cartridges.” Check all of these.

Q5: Can I connect Canon G6020 to multiple devices?

The G6020 does indeed support USB and network/Wi-Fi. Multiple devices (PCs, laptops, phones) on the same network can transmit print jobs once they are linked to Wi-Fi.

Q6: Can I update Canon G6020 firmware without a computer?

Yes, as long as the printer is online, you may update the firmware straight from the control panel (Setup → Device Settings → Firmware Update).

Q7: Will updating firmware erase my Canon G6020 printer settings?

No, changing the firmware does not remove your network setup or print settings. It only modifies the internal software of the printer.

Why won’t my Canon G6020 print in color?

This is brought on by low ink, clogged nozzles, or improper print head installation. Validate that the print head is placed correctly, run cleaning, and check the ink levels.