Canon E470 WiFi Setup

A multipurpose all-in-one inkjet printer, the Canon E470 wifi setup is intended for use in homes and small offices. It provides wireless connectivity for printing, scanning, and copying, enabling users to print from laptops, tablets, and cell phones. In order to set up the Canon E470, you must first unpack it, install the ink cartridges, load paper, then configure the printer using either the Easy Wireless Connect method or the Canon PRINT Inkjet/SELPHY app. In addition to supporting cloud printing and energy-saving auto power on/off, it is compatible with Windows, macOS, and mobile devices. It is a dependable option for routine printing needs since it uses affordable ink cartridges that provide high-quality printouts.

Canon E470 WiFi Setup Manual

Press the Power knob to power on the printer after plugging it in.
Confirm that the Wi-Fi light is blinking.
Release the Wi-Fi knob after holding it down until the power light flashes.
There should be a blinking Wi-Fi indication.
Within two minutes, press your router’s WPS knob.
Once the connection is established, the printer’s Wi-Fi light will continue to blink and stable.

Fix the Canon PIXMA drivers on your device by downloading them from the official http ij start canon website.
Observe the directions on the screen.
During installation, select Wireless LAN Connection and adhere to the instructions to identify the printer.
To confirm a successful canon printer setup, print a test page after connecting.
The Wi-Fi indication need to stay constant.

Canon E470 Wireless Setup

Follow these steps to execute canon E470 wireless setup:

Make that the Canon E470’s Wi-Fi indicator is flashing after turning it on.
Release the Wi-Fi knob after holding it down until the power light flashes. Await the flashing of the Wi-Fi light.
Visit the Canon website to download the Canon IJ Setup (for PC/Mac) or the Canon PRINT Inkjet/SELPHY app (for mobile).
Using a PC, connect a printer to Wi-Fi by running the Canon E470 wireless setup file, choosing Wireless LAN Connection, and then following the directions.
On a mobile device, launch the Canon PRINT app, choose the printer, and establish a connection with the same wireless network.
During Canon E470 wifi setup, manually input the router’s password and SSID if necessary.
To confirm functioning, print a test page after connecting. A steady connection is shown by a steady Wi-Fi light.

Canon E470 Printer Setup With App

The Canon PRINT Inkjet/SELPHY app should be installed.
Make that the Wi-Fi indicator is blinking after turning on the printer. Otherwise, wait for the power light to blink before pressing and holding the Wi-Fi knob.
Connect to the printer’s temporary Wi-Fi network (DIRECT-XXXX) by going to your mobile device’s Wi-Fi settings.
Launch the Canon PRINT app, then adhere to the prompts displayed on the screen.

Permit the printer to link after picking your home WiFi network and entering the keyword. When the connection is successful, the Wi-Fi light will become steady.
After identifying the printer, the software will finish the Canon E470 wifi setup. Print a document or a picture to check the connection.
For remote printing, the software supports AirPrint and Google Cloud Print.

Canon E470 Setup Issues And Troubleshooting

1. The printer is inept to join to WiFi

Before beginning the Canon E470 wifi setup, validate that the Wi-Fi light is flashing.
Try reconnecting after restarting the router.
Employ the WPS technique, which involves clicking the router’s WPS knob within two minutes after pressing the printer’s Wi-Fi knob.
Use the Canon PRINT Inkjet/SELPHY app or the Canon IJ Network Tool on a PC to establish a manual connection if WPS is not available.

2. During installation, the printer was not detected

Confirm whether the printer and the device are connected to the similar WiFi network.
Turn down your firewall and antivirus software for the time being since these can prevent detection.
Try installing using a USB cord, then go to Wi-Fi mode.

3. Poor print quality or printing errors

Validate that the ink cartridges are implanted appropriately.
Use the printer maintenance menu to complete printhead cleaning.
Make use of the proper paper type settings and authentic Canon ink.

4. Paper Jam in Canon E470

After turning off the printer, carefully take off the stuck paper.
Check for any leftover pieces of paper by opening the back cover.
To avoid clogs in the future, use the Auto Cleaning feature.

5. Unable to Connect Mobile App

Validate that the printer and your device are allied to the equivalent WiFi network.
Try again after resuming the Canon PRINT app.
Validate that mobile data is deactivated if you are utilizing Direct Connection mode.

Canon E470 Firmware Update

Confirm the firmware version before upgrading.
Hold down the Stop knob until the warning bulb flashes fifteen times, then let go to print a Network Configuration Page.
Go to the Firmware area after searching for the PIXMA E470 on the official Canon website.
Get the most recent operating system firmware upgrade.
Confirm that the printer is on and allied to the matching wireless network as your PC.
Close any other programs that are connected to the printer.
Trail the commands after opening the downloaded file.
During the update, the printer will restart on its own.
Never disconnect it or turn it off.
Once finished, confirm that the upgrade was completed by checking the firmware version once again.

Canon E470 Reset

Restoring factory settings using a soft reset

Make that the printer is on and allied to the wireless network.
After the alarm bulb has flashed 19 times, press and hold the Stop knob.
Push down the WiFi knob while waiting for the power light blinks twice and then letting go will reset just the WiFi settings.

Factory Reset (Hard Reset)

Turn off the electricity and give it ten seconds.
Turn the printer back while pushing down the Stop knob.
Subsequently a few seconds of holding down the Power knob, let go of both knobs.
Reinstalling drivers and reestablishing a Wi-Fi connection will reset the printer.
Reinstall the Canon PRINT Inkjet/SELPHY software or upgrade the firmware if issues continue after a reset.
Resetting can assist in resolving performance difficulties, printing mistakes, and connection concerns.

FAQS:-

Q.1:- Can I use my Canon E470 without a router?

By turning on Direct Connection (Access Point Mode), you may use your Canon E470 without a router. This eliminates the need for a network and enables your device to connect straight to the printer’s Wi-Fi. Turn it on in the printer’s settings and link your computer or smartphone to the printer’s direct wireless network.

Q.2:- Can I connect my Canon E470 to WiFi without a WPS button?

You may use the Standard Connection Method to manually connect your Canon E470 if your network does not have a WPS button. Use the PC printer driver setup or install the Canon PRINT Inkjet/SELPHY app. To connect, manually enter your Wi-Fi SSID and password when requested.

Q.3:- Can I set up my Canon E470 Wi-Fi without a computer?

Yes, you may use the Canon PRINT Inkjet/SELPHY software to connect the Canon E470 to Wi-Fi without a computer. Connect the printer to your Wi-Fi network, install the app on your smartphone, and then follow the on-screen directions. For printing without Wi-Fi, you may alternatively utilize Direct Connection Mode.

Q.4:- Can I use a Canon E470 with a mobile device?

Yes, mobile printing is supported with the Canon E470. Use Google Cloud Print (for Android), AirPrint (for iOS), or the Canon PRINT Inkjet/SELPHY app. You may print and scan straight from your smartphone or tablet by connecting over Wi-Fi or Direct Connection.

Q.5:- How to find the Wi-Fi password for my Canon E470?

Press and hold the Wi-Fi button until the power lamp flashes, then print a Network Configuration Page to determine your Canon E470’s Wi-Fi password. The output will display the Direct Connection password, if enabled. The Wi-Fi password may also be found on the router’s admin panel.