Canon TR4722 Setup: Step By Step Guide

Whether you’re printing from a computer or a mobile device, a properly configured Canon TR4722 printer guarantees seamless operation. This multipurpose PIXMA all-in-one printer is perfect for home and small office use because it has a compact design and can print, scan, copy, and fax. We’ll take you through every step of the Canon TR4722 setup in this in-depth guide, including how to connect it to a computer, phone, or Wi-Fi. We’ll also cover how to install an ink cartridge, adjust Bluetooth, and set up the fax.

How To Setup A Canon TR4722 Printer?

There are certain ways as follow to access canon TR4722 setup:

1. Canon TR4722 Setup Unpacking And Initial Configuration

Take these actions when you first open your Canon TR4722 printer’s box:

Take off the printer’s protective films, tapes, and packaging materials.
To turn on the device, plug power wire into a vent and push the power button.
Choose your language, nation, and time zone using the control panel.
Follow the printer’s initial Canon TR4722 setup instructions.

2. Installing The Canon TR4722 Setup Ink Cartridge

One black and one color cartridge are used with the Canon TR4722. To put them in place:

Open the printer’s front cover.
Await the centering of the cartridge holder.
Take the cartridges out of the box.
Place color container in the left slot and the black container in the right.
Each cartridge should click after being pushed up and in.
Allow the printer to position the cartridges after closing the cover.

3. How To Connect Canon TR4722 PIXMA Printer To Wifi: Establish A Wireless Network Connection

To activate wireless capabilities, take the following actions for canon tr4722 wifi setup:

Method 1: Making Use of the Control Panel

Click the “Setup” button, which is a gear icon.
Choose “Wireless LAN Setup” and click “OK.”
Pick “Easy canon tr4722 wifi setup” and then pick your network.
Use the keypad to enter your Wi-Fi password.
To connect and confirm, press OK.

Method 2: Making Use of a Computer or Smartphone

Go to ij.canon.begin downloading the driver software or app for the Canon PRINT Inkjet/SELPHY.
Open the application and adhere to the prompts displayed on the screen.
To finish the Canon wireless printer setup, select your printer model (Canon TR4722) and adhere to the instructions.
If the printer is reset or doesn’t connect, repeat these steps as necessary.

4. How To Canon TR4722 Connect To Computer Or Phone?

You can connect canon tr4722 to computer using Wi-Fi or USB.

USB Link:

Use a USB cable to connect the printer to your PC.
Install the driver software after downloading it from ij.canon.start.
Follow the installation instructions on the screen.

Wireless Link:

First, finish configuring the canon tr4722 wifi setup.
Circumnavigate to Devices and Printers (Windows) or Printers & Scanners (macOS) on machine.
On the “Add Printer” screen, pick your Canon TR4722.
The Canon TR4722 can now be connected to a computer by USB or wifi.

Canon TR4722 Phone Connection

Using your smartphone to print straight from:

Get the Canon PRINT Inkjet/SELPHY app from the Apple App Store or Google Play.
Make that the printer and phone are connected to the same wireless network.
Launch the application, then choose “Add Printer.”
To identify and register the TR4722, adhere to the on-screen instructions.
Now, you can use mobile device to scan, copy, or print.

6. Canon TR4722 Bluetooth Setup

Bluetooth printing is not natively supported by the Canon TR4722. On the other hand, Wi-Fi Direct-capable wireless printing apps are available. Update the app to the most recent version and make sure you’re using a supported method if you’re having trouble pairing a device over Bluetooth.

7. Canon TR4722 Fax Setup

To set up your Canon TR4722 for fax:

Attach a phone line to the printer LINE jack.
Press the control panel FAX knob.
Select Fax Settings under Setup.
Pass in name and fax number of senders.
Select the resolution, ring count, and other transmission and reception parameters.
Load your document and dial the recipient’s fax number to send a fax.
When faxing, you can additionally store up to 50 pages using memory transmission.

Tips For Troubleshooting Canon Printers

Even with the proper Canon TR4722 configuration, problems can occasionally occur. Here are some fundamental Canon printer troubleshooting advice:

Printer not found on network: Verify that the printer and device are on the same network and reset the Wi-Fi password.
Paper jams: Gently remove the jammed paper by opening the back cover.
Fading prints: Use the maintenance menu to initiate a print head cleaning cycle.
If the cartridge is not recognized, take it out, clean it and put it back in.
Reinstall the driver software or use the Canon PRINT app to check for firmware upgrades if the issue persists.

Using Cloud Services for Printing

After Canon TR4722 setup, you may use Canon’s Cloud Link to print from Dropbox, Google Drive, and other cloud services. To get this going:

Open the Canon SELPHY/PRINT Inkjet app.
Choose your printer.
Go to “Cloud” and log in using your credentials.
Choose documents or images, then print them.

Optional Voice-Activated Printing

Voice assistants such as Google Assistant and Amazon Alexa are compatible with the Canon TR4722:

From the app on your smart assistant, activate Canon Print Action.
Connect your Canon account.
For example, “Alexa, print a coloring page.” make use of voice commands.

The Canon TR4722 setup procedure is easy to use and seamless when followed correctly. This tutorial offers all the information you require, whether you’re setting up the Canon TR4722 WiFi, inserting cartridges, adjusting fax settings, or working out how to connect the Canon TR4722 to a computer or phone.

FAQs

Does the Canon TR4722 require an internet connection to operate?

Yes, you can print without an internet linking by using Wi-Fi Direct or a USB cable. Even when there isn’t an active Wi-Fi network, Wi-Fi Direct enables your device to connect straight to the printer for local printing.

Is duplex printing supported by the Canon TR4722?

Yes, automated duplex (double-sided) printing is supported with the Canon TR4722 setup. Before printing, you can activate this feature in your printer’s settings, which saves paper and makes it easy to create papers or booklets that appear professional.

What types of paper can the Canon TR4722 handle?

The Canon TR4722 supports various paper types, including plain, photo paper, envelopes, and labels. Supported sizes include Letter, Legal, A4, and 4×6 inches. Always check the printer’s paper guides and settings before loading a different paper type.

How do I check ink levels on the Canon TR4722?

To check ink levels, press the Setup button on the printer and navigate to “Ink Level Information.” Alternatively, use the Canon PRINT app or driver software on your computer to monitor ink usage and receive low-ink alerts.

Is it possible for the Canon TR4722 to scan several pages into a single file?

Yes, you can use your computer’s IJ Scan Utility or the Canon PRINT software to scan several pages into a single PDF. For quicker multi-page scanning without constantly opening the scanner cover, use the automated document feeder (ADF).