Canon TS3722 Setup

The Canon TS3722 setup is an entry-level wireless all-in-one printer intended for home and small-office use. It provides printing, scanning, and copying capabilities as well as convenient wifi networking. The Canon TS3722 printer must be unboxed, ink cartridges installed, paper loaded, and Wi-Fi connected before it can be used. You may configure it via the Canon PRINT Inkjet/SELPHY app or manually through the printer’s control panel. It supports AirPrint, Mopria, and USB connections for a variety of printing choices. The TS3722 is compatible with Windows, macOS, and mobile devices, making it an excellent solution for those looking for value and ease of use.

Canon TS3722 Setup Manual

Remove all package contents and protective tapes.
Remove the printer, power wire, and ink cartridges.
Plug in the power wire and start the printer.
Open the front cover and put the black and color ink cartridges into the designated slots.
Adjust the paper guide and place plain letter-sized paper in the back tray.
For wireless Canon TS3722 setup, utilize the Canon PRINT Inkjet/SELPHY app or the WPS protocol.
Connect to your computer using a USB cord.
Download and install the Canon TS3722 drivers from the official ij.start.cannon website.
Print a test page to check the configuration.
Register your printer online to get warranty and assistance.

Canon Wireless Printer Setup With App

Download the Canon PRINT Inkjet/SELPHY app.
Ensure that the printer is plugged in and switched on.
Launch the app and choose “Set Up”.
Select the printer model (TS3722) from the list.
The app will walk you through Wi-Fi configuration.
If asked, enable the app to access your location and Wi-Fi settings.
Choose your Wi-Fi network and input its password.
Wait until the printer connects successfully.
Print a test page from the app to confirm the printer setup.
Your printer is now ready to print wirelessly from mobile and computer devices.

Canon TS3722 Setup WPS

Follow these points to execute Canon TS3722 wifi setup:

Make sure your router has a Wi-Fi Protected Setup (WPS) button.
Plug in and turn on your Canon TS3722 printer.
Press and hold the Wireless button until the Wi-Fi lamp flashes.
Within two minutes, push and hold your router’s WPS button until it blinks.

The printer’s Wi-Fi bulb will continue to blink before remaining constant blue once connected.
To test connectivity, print a network status page from the printer’s settings.
Download and install the required software from the Canon website to ensure complete functioning.
Print a document to ensure that wireless printing is working.

Canon TS3722 Wireless Setup Issues And Solutions

Here are some typical Canon TS3722 wireless setup issues and their solutions:

1. Wi-Fi Connectivity Issues

Problem: The printer won’t connect to Wi-Fi.

Solution: Put it in Canon TS3722 setup mode (push and hold the Wi-Fi button until the power light flashes). Connect with the Canon PRINT app or via WPS.

2. Driver Installation Issue

Problem: Drivers fail to install on PC.

Solution: Download the most recent drivers from Canon’s official website. If antivirus installation is being prevented, temporarily disable it.

3. Printer Not Recognized By Device

Problem: This issue occurs when the printer is not detected by the PC or smartphone.

Solution: Check the USB cable connection and reconnect to the same Wi-Fi network. Restart the printer and device.

4. Paper Jams

Problem: Paper jammed within printer

Solution: Open the back cover, gently remove the stuck paper, and reload correctly.

5. Print Quality Issues with Canon TS3722 wireless setup

Problem: Faded prints or streaks.

Solution: Clean the print heads using the printer’s settings. Use genuine Canon ink.

6. Ink Is Not Recognized

Problem: The printer does not recognize the ink cartridge.

Solution: Remove and reinsert the cartridges, making sure they are well placed.

Canon Printer TS3722 Firmware Update

Updating the firmware on your Canon TS3722 printer guarantees the best performance, security, and compatibility.

Steps to update firmware:

To view the current version, print a network configuration page from the printer’s settings.
Go to Canon’s official support page and search for “TS3722 firmware update.”
Download the correct firmware file for your printer model.
Connect your printer to the computer by USB or make sure it is on the same Wi-Fi network.

Open the downloaded firmware file and follow the on-screen instructions.
Make sure the printer is linked to Wi-Fi.
Open the Canon PRINT app, choose Settings, and check for firmware updates.
After upgrading, switch off the printer and restart it to effect the changes.

Canon Printer TS3722 Reset

Resetting your Canon TS3722 printer can fix a variety of difficulties, including connection problems, ink recognition failures, and erroneous settings.

Types Of Resets And Steps:

Soft Reset (basic Restart)

Turn off the printer and unplug it for 5 minutes before turning it back on.

Reset the network settings (Wi-Fi)

Press and hold the Wi-Fi button until the power indicator flashes.
Reconnect the printer to your Wi-Fi network using the Canon PRINT app or the WPS technique.

Hard reset (factory reset)

Press and hold the Stop button until the alarm light blinks, then release.
The printer will be reset to factory settings.

Reset with the Canon PRINT App

Open the app, navigate to Printer Settings, and then click “Restore Defaults.”
After resetting, you must modify Wi-Fi settings and replace drivers if required.
Sometimes you may need to do the Canon printer TS3722 setup again.

FAQS:-

Q.1:- Where can I download Canon TS3722 drivers?

The most recent TS3722 printer drivers may be downloaded from Canon’s official support page at ij.start.canon. Before downloading, make sure you choose the appropriate operating system.

Q.2:- What to do if my Canon TS3722 won’t connect to Wi-Fi?

Make sure the printer is within range and that your network is operating correctly if your TS3722 is having trouble connecting to Wi-Fi. Make sure you’re inputting the right network credentials during setup, and restart the router and printer.

Q.3:- How do I check ink levels on my Canon TS3722?

Use the Canon app on your phone or the printer’s status monitor on your PC to see the ink levels. These tools provide you up-to-date information on how much ink is left.

Q.4:- Can I print from my smartphone with the Canon TS3722?

Yes, you may use the Canon PRINT Inkjet/SELPHY app, AirPrint on iOS devices, or Mopria Print Service on Android devices to print from your smartphone. Make sure the Wi-Fi network that your printer and smartphone are linked to is the same.